Archive for September, 2013

IEEE USA Elections End October 1st

Be sure to review the candidtates and vote!

http://www.ieee.org/about/corporate/election/usape.html

September 24th, 2013

Industry Engineering Forum Focus: Automotive (Free workshop)

The Ohio State Un;iversity and IBM Rational present:

Industry Engineering Forum Focus: Automotive

  Please Join Auto Experts in Columbus, OH  (there is no charge to attend this full day workshop)

 The automotive industry is facing steeper challenges than ever before.  System complexity is exploding and engineers are stretched to their limits.  Global engineering demands tool agility and broad, supplier chain collaboration. Please join The Ohio State University and IBM Rational® for an Automotive-focused Industry Engineering Forum at The Blackwell Inn on October 10th, 2013. This interactive forum will convene industry experts, innovative students, IBM Rational leaders, and key automotive solution partners who will provide thought leadership in tools, technology, and best practices to tackle these challenges. We look forward to meeting you there!

 Learn from Luminaries, including:

October 10, 2013

8:30 AM – 5:30 PM  Eastern Time

 Location

The Ohio State University, The Blackwell Inn

2110 Tuttle Park Place, Columbus, OH 43210

  Dr. Giorgio Rizzoni

The Ford Motor Company Chair in ElectroMechanical Systems

Professor of Mechanical and Electrical Engineering and Adjunct Professor of Industrial

Design at The Ohio State University

 Kent Helfrich

Executive Director, Global Electrical Systems at General Motors

 Mr. Brett Hillhouse

World Wide Automotive Sales Executive for IBM

 Leaders from  IEEE, Method Park, CloudONE, Sodius, National Instruments, 321 Gang, kVA, RTI, River North, and Electric Cloud will be in speaking on key topics including product development in the cloud, automated test, process and safety compliance, build acceleration, and agile in systems design.  We will close the day with a lively panel comprised of futurists, technologists, and leaders.

 See the full agenda at: http://tiny.cc/IEF_OSU_Auto_Agenda

 You will leave with deeper understanding of current and approaching trends in embedded systems, real use cases, and new contacts from collaborating with the brightest automotive minds from industry, technology, and academia.

 Complimentary lunch and parking.  Space is limited, we invite you to register today!    http://tiny.cc/IEF_OSU_Auto

September 24th, 2013

SEPTEMBER MEETING

ADDITIVE MANUFACTURING/3D PRINTING

DATE:

Thursday, September 26, 2013 

 

PLACE :

Raffel’s – 10160 Reading Road (see below for directions)

TIME :

5:30 p.m. to 6:00 p.m. –  Social Time

 

6:00 p.m. to 7:00 p.m. –  Dinner

 

7:00 p.m. to 8:45 p.m. –  Presentation

COST

$10- $15, See information in Reservations

   

 

 

 We will be awarding 10 Free dinners to any future section meeting!!!

ABOUT THE MEETING:   

Create jet engines in the comfort of your living room?  Not quite, but local expert Ted Anderson of GE will show how GE is now using 3D printing/ Additive Manufacturing to create intricate engine components from CAD to complete parts in days, not months using Direct Metal Laser Sintering, and Electron Beam Melting.

Since 2003, Morris Technologies, Inc. http://www.morristech.com/Technologies/ has been known for its extensive capabilities utilizing Direct Metal Laser Sintering (DMLS) to produce complex geometries.  The process uses a high power laser and scanner system to fuse fine metal powder layer by layer to create fully dense parts. With the proper thermal treatments, these ‘grown’ components exhibit near wrought properties. 

Electron Beam Melting is an additive manufacturing process that uses multiple high-power electron beams to melt layers of metal powder into complex forms and shapes.  EBM grows parts in a vacuum environment, eliminating the need for post-build stress relieving and enabling parts to be grown using thicker layers than other technologies.

Published on May 22, 2013

GE Aviation is revolutionizing the age-old rules of manufacturing and design. Learn how additive manufacturing, a 3D printing technology, frees engineers to design the perfect jet engine.

http://youtu.be/l0SXlkrmzyw

 ABOUT THE PRESENTER:  

Ted Anderson has a BSME, MSME, and an MBA.  Ted got his big start with additive manufacturing/3D printing in 2005 while researching a flexible surface with multiple degrees of freedom that he was building using a stereolithography (SLA) system.  His career in additive manufacturing includes working for Georgia Tech, Arcam AB, Raytheon as a contractor for NASA, and his current employer GE.  He has experience working with multiple platforms that includes metals, plastics, and electronics.  The systems he has experience with includes fused deposition modeling (FDM), selective laser sintering (SLS), MultiJet, SLA, electron beam melting (EBM), direct metal laser sintering (DMLS) and selective laser melting (SLM)

 MENU SELECTIONS:

Baked Tilapia with Lemon Caper Sauce, Stuffed Pork Chops, Grilled Portobello w/ Ratatouille & Yellow Rice

Sautéed Vegetables, Tossed Salad, Dinner Rolls and Butter, Chef’s Choice Dessert

LOCATION:  Raffel’s is located at 10160 Reading Road, south of Glendale-Milford Road on the east side of Reading. Take I-75 to the Glendale-Milford Rd. Exit, go east on Glendale-Milford Road approximately ¾ of a mile to Reading Rd. and turn right on Reading.

 RESERVATIONS:  Please make reservations for each meeting by going to: http://www.ieeecincinnati.org/meetings/.  Please click on the appropriate link and complete the reservation. 

Reservations close at midnight on September 22, 2013.

DINNER RESERVATION CANCELLATION POLICY
An email to Reservations@ieeecincinnati.org prior to the close of reservations is required to properly cancel your reservation.

All Reservations must be made by midnight, Sunday September 22, 2013

 PE CREDITS:  Depending on the subject matter, attendance at IEEE Cincinnati Section Meetings now qualifies the attendee for Professional Development Hours towards renewal of Professional Engineers Licenses. Required documentation will be available following the meeting!  The Section Meetings also provide a great opportunity to network with fellow engineers in the area.

September 5th, 2013


Calendar

September 2013
S M T W T F S
« Aug   Oct »
1234567
891011121314
15161718192021
22232425262728
2930  

Posts by Month

Posts by Category